TURBOTAPE MASKING, 1/4" (112 Feet)
TurboTape Masking in 1/4-inch size feathers paint, primer and chip guards leaving a non-contact smooth break line. It is also effective in sealing door jambs and cavities from overspray.
Length: 112 feet (3 coils 37.5 ft each)
Width: 1/2 inch
Height: 1/4 inch
Quantity: 1 Pack
25-30% cheaper per foot than our competitor's price! And better!
VOLUME: For volume orders, please email waterjet@waterjettech.com or call 314-428-6900 for direct assistance. This product is available by the case (8 rolls per each), and we are happy to provide multiple shipping solutions.
TURBOTAPE MASKING, 1/8" (150 feet)
Turbo Tape beveled edge spray paint masking in 1/8” thickness. This product breaks or terminates thinner coatings yielding a sharp yet smooth coating transition or DE-mask line. The product is highly conformal, turns corners, re-position able, adhesive transfer resistant, and the adhesive comes with a protective liner. Excellent for smooth termination of both industrial and automotive paints and coatings. Constructed from solvent proof foam. Made in the USA.
Length: 150 feet (Two 75-ft coils)
Width: 1/2 inch
Height: 1/8 inch
Quantity: 1 Roll
NOTE: Please call 314-428-6900 for availability.
TURBOBUFF 8" ALL-PURPOSE BUFFING PAD
All-Purpose, single-sided foam buffing pad with industrial grade loop attachment backing used for buffing larger areas and panels. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running significantly cooler than other pads. The 2-inch pad thickness allows the backer to clear near by body accessories and contours. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use yet highly conformal pad. Buffs right to the edge and can absorb lateral contact. Made in the USA.
For use with all 7 to 8-inch hook backing pads on any buffer type.
Size: 8.3-inch diameter x 2-inch thick
Quantity: 1 pad
TURBOBUFF 7" ALL-PURPOSE BUFFING PAD
All-Purpose, single-sided foam buffing pad with industrial grade loop attachment backing used for buffing larger areas and panels. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running significantly cooler than other pads. The 2-inch pad thickness allows the backer to clear near by body accessories and contours. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use yet highly conformal pad. Buffs right to the edge and can absorb lateral contact. Made in the USA.
For use with all 7-inch hook backing pads on any buffer type.
Size: 7.3-inch diameter x 2-inch thick
Quantity: 1 pad
TURBOBUFF 6" ALL-PURPOSE BUFFING PAD
All-Purpose, single-sided foam buffing pad with industrial grade loop attachment backing used for buffing medium to large panels. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running significantly cooler than other pads. The 1.5-inch pad thickness allows the backer to clear near by body accessories and contours. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use yet highly conformal pad. Buffs right to the edge and can absorb lateral contact. Made in the USA.
For use with all 6-inch hook backing pads on any buffer type.
Size: 6.3-inch diameter x 1.5-inch thick
Quantity: 1 pad
TURBOBUFF 5" ALL-PURPOSE BUFFING PAD
All-Purpose, single-sided foam buffing pad with industrial grade loop attachment backing used for buffing medium to large panels. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running significantly cooler than other pads. The 1.5-inch pad thickness allows the backer to clear near by body accessories and contours. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use yet highly conformal pad. Buffs right to the edge and can absorb lateral contact. Made in the USA.
For use with all 5-inch hook backing pads on any buffer type.
Size: 5.3-inch diameter x 1.5-inch thick
Quantity: 1 pad
TURBOBUFF 4" ALL-PURPOSE BUFFING PAD (2-Pack)
All-Purpose, single-sided foam buffing pad with industrial grade loop attachment backing used for buffing medium to large panels. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running significantly cooler than other pads. The 1.5-inch pad thickness allows the backer to clear near by body accessories and contours. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use yet highly conformal pad. Buffs right to the edge and can absorb lateral contact. Made in the USA.
For use with all 4-inch hook backing pads on any buffer type.
Size: 4.3-inch diameter x 1.5-inch thick
Quantity: 2 pads
TURBOBUFF 3" ALL-PURPOSE BUFFING PAD (2-Pack)
All-Purpose, single-sided foam buffing pads with industrial grade loop attachment backing used for buffing small areas or tight spots. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running cooler than other pads. The 1.5-inch pad thickness allows the backer to clear near by body accessories. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use pad. Made in the USA.
For use with all 3-inch hook backing pads on any buffer type.
Size: 3.3-inch diameter x 1.5-inch thick
Quantity: 2 pads
TURBOBUFF 2" ALL-PURPOSE BUFFING PAD (2-Pack)
All-Purpose, single-sided foam buffing pads with industrial grade loop attachment backing used for buffing small areas or tight spots. Works with both rotary and orbital type buffers. This multi-purpose pad can apply all types of compounds, waxes or sealants. The high tensile strength closed cell foam reduces tearing and product absorption dramatically increasing pad life while running cooler than other pads. The 1.5-inch pad thickness allows the backer to clear near by body accessories. For use in removal of swirl marks and minor paint defects. The integral fin-cuts about the pad perimeter and the pads thickness results in a very easy to use pad. Made in the USA.
For use with all 2-inch hook backing pads on any buffer type.
Size: 2.3-inch diameter x 1.5-inch thick
Quantity: 2 pads
|
|
